Performing Condition Monitoring—Exercises
Main Exercise
Purpose: The purpose of these lessons is to learn how to
do condition measurement. If condition values exceed specified limits a
corresponding maintenance task is generated and must be executed.
Purpose: The purpose of this lesson is to log the condition
status of the Wheel Tread on the Nose Landing Gear to see if it is time for
maintenance. The measuring gauge shows a value of 17 millimeters.
The purpose of this lesson is to log condition values
and check if a maintenance task should be generated.
Windows:
Serial Operational Information
- To be able to find the serial number for your wheel
open the
Serial Operational Information window and query for your A/C, Serial Number nX20000.
- Click the Condition Meas. in Structure
tab, select the record for Part Number
= X32WHE7002, right-click and click Serial Operational Information.
- Click the
Condition Meas tab.
- Enter 17 in the Measure Value field and save (F12).
- Do you get any message of task creation (there should not be)
- Go to exercise: Operational Logging - 2
Purpose: With your A/C on ground it is time to do a new
check of the condition status of the Wheel Tread on the
Nose Landing Gear. This time the measuring gauge shows a value of 12
millimeters. The purpose of this lesson is to log condition values
and check if a maintenance task should be generated.
Windows:
Serial Operational Information
- To be able to find the serial number for your wheel
open the
Serial Operational Information window and query for your A/C, Serial Number nX20000.
- Click the
Condition Meas. in Structure
tab, select the record for Part Number
= X32WHE7002, right-click and click Serial Operational Information.
- Click the
Condition Meas. tab.
- Enter 12 in the Measure Value field and save (F12).
- Do you get any message of task creation (there should be !!)
- Go to exercise
Task
Distribution-1