Enter Analysis Results for Production Schedule Parts

Explanation

Use this activity to enter analysis results for one or more analyses connected to a production schedule.

This activity allows you to record the measure quality results against the quality test plan (Control Plan) on completion of a production schedule. Specific quality test results for a part within a manufacturing cell are recorded. The analysis must first be created during the production schedule receipt process. 

You can change the status of a data point to Complete. Only data points in complete status are considered when creating control charts or calculating capability indices. Once the data point has this status, the results cannot be edited. You can also create a new control chart if SPC is activated in the control plan.

When all data points for an analysis have been reported, you can change the status to Confirmed. Once an analysis has been confirmed, the results cannot be edited.

This activity contains a Security Checkpoint which can be activated by an administrator. With an activated security checkpoint on a function you will have to authenticate yourself again in order to fulfill the function. Additionally, whenever a security checkpoint is successfully passed a security checkpoint log is written, creating an audit trail of what is done.

Prerequisites

This activity has the following prerequisites:

System Effects

As a result of this activity:

Window

Analysis Results
Overview Production Schedule Analysis

Related Window Descriptions

Analysis Results
Production Schedule Analysis
Create Analysis Production Schedule
Analysis

Procedure

To perform this activity, follow these steps:

  1. If you are working on previously created analyses, open the Analysis Results window and query for the part for which you want to enter data.
  2. If you just created the analyses, the system prompts you to indicate whether you want to view the created analysis overview. If you click Yes, the Overview Production Schedule Analysis window appears. Right-click on the line for which you want to report results and then click Analysis Result to open the Analysis Result window.
  3. If the part is serial tracked and variable data type results need to be entered, right-click on the header and click Enter Serial Numbers. The Enter Serial Numbers dialog box is opened. Select the Selected Serial No check boxes for the corresponding serial numbers of the parts included in the analysis. Click OK.
  4. If the part is lot/batch tracked, and if the corresponding lot/batch number has not been filled in Lot/Batch No field in the header, then enter a value in the Lot/Batch No field. Use the List of Values to select a suitable value.
  5. Optionally, in the Analysis Results header, select a filter value for the Data Point Filter field to populate the analysis according to the selected option.
  6. For data points defined as variables, select the Variables tab and enter your results in the Result field. For serial tracked parts, the serial number also needs to be entered in the Serial No field. Use the List of Values to select a suitable value.
  7. For data points defined as attributes, select the Attributes tab and enter your results in the Nonconformities (c/u) and/or the Nonconforming (np,p) fields.
  8. Save the changes.
  9. To change the status to Complete, right-click and then click Complete Registered Results.
  10. To create a new control chart if SPC is activated in the control plan, right-click on the line and click Create SPC Chart.
  11. To print a test instruction, right-click in the header and then click Print Test Instruction. The test instruction includes all control plan lines.
  12. To add document text to any line, right-click and click Document Text.
  13. To print a report of your results for any line, right-click and click Print Data Sheet.
  14. To confirm a single analysis, right-click in the header of the analysis and then click Confirm Registered Results
  15. When the analysis results are confirmed, the values in the Variable Result Status and Attribute Result Status fields are calculated automatically. 
  16. To confirm multiple analyses, select one or more analysis in the Analysis window, and then right-click and click Confirm Registered Results.