Enter Permit Type

Explanation

Use this activity to connect a permit type to a PM (Preventive Maintenance) Action. A common permit type is Safety Regulations, intended to ensure employee safety. Permits are created and connected to the work order upon generation, and could be printed along with the work order. You can also link permit types used for pure instructions for the PM action.

An isolation can also be connected to the permit type. Isolations describe how a certain part of the facility should be shut down temporarily, so that the specified work can be carried out under safe conditions. 

Prerequisites

• Permit types, isolation types and a connection between them must have been defined in Work Order and PM Basic Data.
• Isolations must have been defined in IFS/Equipment.

System Effects

As a result of this activity, permit types and isolations (where applicable) are connected to the PM action. 

Window

Separate PM Action
Route PM Action

Related Window Descriptions

Separate PM Action
Separate PM Action/Permits
Route PM Action
Route PM Action/Permits

Procedure

1. Open either the Separate PM Action window or the Route PM Action window, and create a new record (F5) or query for an existing one (F3).
2. Click the Permit tab and create a new record (F5).
3. Enter a value in the Permit Type field. Use the List of Values to select a suitable value.
4. Enter a value in the Isolation ID field. Use the List of Values to select a suitable value.
5. Select the Generate check box if you want a permit to be created during the work order generation process.
6. Save the information (F12).