Remove Operational Parameter for Serial Part

Explanation

This activity is used to remove an operational parameter for a serial part. When removing an operational parameter, you can also choose to remove the operational parameter from all maintenance groups for which it is defined.

Note: It will not be possible to remove an operational parameter if life limit values have been accumulated for one or more serials defined for the operational parameter.

Prerequisites

• Operational loggings should not have been performed for the operational parameter for any serial.
• Life limit values should not have been accumulated for the operational parameter for any serial.

System Effects

• The operational parameter for the serial part will be removed.
• If selected, the operational parameter will be removed from all maintenance groups for which it is defined.

Window

Serial Part
Operational Parameters per Part
Establish Maintenance Data for Template Structures

Related Window Descriptions

Serial Part
Serial Part/Operational Parameters
Operational Parameters per Part
Establish Maintenance Data for Template Structures/Template Structure/Operational Parameters

Procedure

1. Open the Serial Part window.
2. Populate (F2) or query (F3) for the necessary serial part.
3. Click the Operational Parameters tab.
4. Select the operational parameter you wish to remove, right-click and click Remove Operational Parameter.
5. In the information message that appears, click Yes if you wish to remove the operational parameter defined for the connected maintenance groups as well. Click No if you only wish to remove the operational parameter and leave the connection to the maintenance groups as it is.

Note: This procedure can also be performed from the Operational Parameters per Part window and the Operational Parameters sub tab found in the Establish Maintenance Data for Template Structures/Template Structure tab.