Enter Handling Unit Types

Explanation

This activity is used to create and maintain handling unit types. This task is to be performed by a system administrator or an equivalent person.

Handling unit types types are available when you define the handling unit structure, either for parts in templates, or more directly for a shipment. The handling unit structure on a shipment is built up by defining a structure of different handling unit types which in turn can contain a specified number of parts. When a particular handling unit type is selected, the weight of the handling unit type is included in the calculation of the total weight of the handling unit structure. This handling unit information can be used when planning load volumes and weights.

By specifying additive volume for a handling unit type, it determines that the volume of the handling unit is dynamic and defined by the content attached to this handling unit. A typical example of such a handling unit type is a pallet. Handling unit types not having additive volume would typically be a box which has a fixed volume, regardless of content.

Prerequisites

At least one handling unit category must exist. Typical categories could be pallets or packages, but it is possible to freely define the handling unit categories desired.

System Effects

Window

Handling Unit Types

Related Window Descriptions

Handling Unit Types

Procedure

  1. Open the Handling Unit Types window and then select New.
  2. In the Handling Unit Type field, enter an ID, using no more than 25 alphanumeric characters.
  3. Enter a description for the handling unit type.
  4. Enter the handling unit category to be used for this handling unit type.
  5. Optionally, enter a volume and select an appropriate UoM for volume from the List of Values.
  6. Optionally, enter the standard weight of the handling unit type and select an appropriate UoM for weight from the List of Values.
  7. Optionally, specify whether the handling unit type has additive volume or not.
  8. Optionally, enter dimensions, maximum volume or weight capacity and if the handling unit type is stackable or not. These values are only used as information.
  9. Save the changes.