Remove Connection to Subtask
Explanation
This activity is used to remove a subtask from an instruction. Subtasks are connected to the instruction in the
Instruction/Subtask/Subtasks sub tab. You can choose to only remove the
connection between the subtask and instruction or to remove both the connection
and the subtask in this activity.
Prerequisites
- Subtasks must be connected to the instruction which in turn is connected
to task codes (i.e., maintenance codes, condition limits, modifications,
fault functions and life limits).
- If the subtask is to be removed, detailed data (e.g., a connected
material or a zone) should not be connected to it.
System Effects
As a result of this activity, the connection to the subtask is removed from the
instruction. If specified, the connected subtask will be removed from the
system.
Window
Instruction
Related Window Descriptions
Instruction
Instruction/Subtasks/Subtask
Procedure
- Open the Instruction window.
- Populate (F2) or query (F3) for the necessary
instruction.
- Click the Subtasks tab and then
click the Subtasks sub tab.
- Select the row for the connection you want
removed, right-click, and then click Remove Connection. The
Remove Connection dialog box opens.
- If you only want to remove the connection to the subtask, click
OK.
- If you want to remove both the connection and the subtask itself,
select the Remove connection and the instruction or the subtask check
box. Note: If the subtask that is to be removed is included in a
sequence, the Sequencing is defined and will be removed check box
will be selected automatically.
- Click OK.