Assign Parts to Modification

Explanation

This activity is used to define allowed part numbers for a modification. Here you may also define if the modification should be performed at the next visit to the workshop or when the next interval based maintenance is performed. The modification may be performed at the next visit to the workshop or when the next interval based maintenance is performed instead of defining a terminating action interval.

Prerequisites

• Part numbers must be defined.
• A modification must be defined.
• To select a maintenance code for the Next Interval Maintenance, an instruction must be defined for the part number and maintenance code, and the maintenance code has to be set up in a maintenance plan. See Define Maintenance Code for more information.

System Effects

• When you define a part number and the Assignment Type registered on the modification is set to By Serial Range, all part revisions for serials with the defined part number are automatically created as assigned part revisions in Define Modification/Assign Part Revisions.
• If you define a part number and the Assignment Type registered on the modification is set to By Revision All Serials and there exists only serials of one part revision, the part revision is automatically created as an assigned part revision in Define Modification/Assign Part Revisions. If there exists serials of more than one part revision, the part revisions must be manually inserted.
• If you select the Decompliance Allowed check box, the modification can be decomplied with.
• If you select the Next Visit In Workshop check box, a pending task is automatically created for each assigned serial as soon as the modification's Status is changed to Active. When distributing any kind of task to a work order, the pending task for this modification is automatically added to the same maintenance order or work order.
• If you enter a maintenance code in the Next Interval Maintenance field, a pending task is automatically created for each assigned serial as soon as the modification's Status is changed to Active. The modification task is automatically added to the same maintenance order as the interval based maintenance task when distributing task to work order.
• If you select the Last Due Date Trigger Execution check box on the part number, the latest due date is selected instead of the earliest due date when the modification task calculation is run. By default, the earliest due date is selected.

Window

Define Modification

Related Window Descriptions

Define Modification/Assign Parts
Serial Parts
Instructions/Maintenance Code

Procedure

1. Query the modification revision you want to register parts for in the Define Modification window.
2. Click the Assign Parts tab.
3. Enter the Part Number that this modification is called out on or applicable for.
4. By default, the Decompliance Allowed check box is selected. Deselect this check box if you do not want decompliance enabled for the modification.
5. Determine if you want the Next Visit In Workshop, Next Interval Maintenance, and Last Due Date Trigger Execution check boxes to be valid for the parts assigned to the modification. Select or deselect the check boxes as required.
6. Click Save.