Complete Disposition Shop Order Line - Component MRO

Explanation

This activity is used to specify the state of completion of the information on the disposition line. You can identify that the information relating to modifications, discrepancies, or repair codes is either complete or incomplete for the part on the disposition line.

If you have set your modification tasks or discrepancies to completed, and later on realize that this was a bit rash, you can reopen the modifications or discrepancies and perform the necessary updates.

If you have completed the entire repair work for the disposition line, and later on need to apply some updates, you can reopen the repair as long as the disposition line has not yet been approved. When the disposition line is approved, you cannot reverse the repair process for any updates or changes.

Prerequisites

• A disposition shop order with a disposition line must exist.
• Serials and/or lot/batch numbers, as well as the identification of parts, must have been done for the parts on the disposition line.
• All material and operations related to the disposition process must have been issued and reported.

System Effects

As a result of this activity, if all of the information is complete, the status of the specific information for the line or lines changes to Completed.

Window

Disposition Shop Order

Related Window Descriptions

Disposition Shop Order
Disposition Line Status

Procedure

To view the status of the actions to be performed for a disposition line:

1. Open the Disposition Shop Order window and search for your order.
2. In the upper table section, right-click and then click View Disposition Line Status.

To set discrepancies to completed:

1. Open the Disposition Shop Order window and search for your order.
2. In the upper table section, select one or more lines.
3. Right-click and then click Discrepancies Complete.
4. A message appears asking whether or not you would want to complete the line(s).
5. Click Yes. The status of the specific information for the line(s) changes to Completed.

To set modification to completed:

1. Open the Disposition Shop Order window and search for your order.
2. In the upper table section, select one or more lines.
3. Right-click and then click Modifications Complete.
4. A message appears asking whether or not you would want to complete the line(s).
5. Click Yes. The status of the specific information for the line(s) changes to Completed.

To set repairs to completed:

1. Open the Disposition Shop Order window and search for your order.
2. In the upper table section, select one or more lines.
3. Right-click and then click Repairs Complete.
4. A message appears asking whether or not you would want to complete the line(s).
5. Click Yes. The status of the specific information for the line(s) changes to Completed.

To reverse the completion, i.e., reopen discrepancies, modifications and/or repairs:

1. Open the Disposition Shop Order window and search for your order.
2. In the upper table section, select one or more lines.
3. Right-click and then click Re-open Discrepancies, Re-open Modifications, or Re-open Repairs.
4. A message appears asking whether or not you want to complete the line(s).
5. Click Yes. The status of the specific information for the line(s) changes to Completed.