Connect Gasket Part to Design Object Nozzle

Explanation

This activity is used to connect a gasket part to a design object nozzle. This information will help create Nozzle BOM diagrams. Gaskets are created as design parts and their data is later inherited by the connected equipment object nozzles.

The Gasket and Gasket Part fields for a mechanical nozzle have different uses. The Gasket field is used for entering gasket requirements (e. g., Graphite, SPW (spiral wound), Teflon) for a mechanical nozzle. The Gasket Part field is used for connecting the suitable part to the mechanical nozzle by entering the gasket's design part ID.

Prerequisites

• A gasket part, which is essentially a design part of the Gasket design part class, should be created.
• The class of the design object nozzle should have its Can have Mechanical Nozzles Class Property set to True.
• The class of the gasket part should have its Can be Nozzle Part Class Property set to True.

System Effects

The design object nozzle will have a connected gasket part.

Window

Design Object Nozzles

Related Window Descriptions

Design Object Nozzles

Procedure

1. Open the Design Object Nozzles window.
2. Search for the design object nozzle to which you want to connect the gasket part.
3. In the Gasket Part field, enter the identity of the gasket part to be connected or use the List of Values to select one.
4. Optionally in the Gasket field, enter the type of gasket. e.g., Teflon or Graphite.
5. Click Save.